Evaluation of Physicochemical, Physical, Functional, and Optical Properties of Stored and Fresh Yam Tubers for Production of Quality Instant Pounded Yam Flour
Main Article Content
Abstract
Yam tubers are the most suitable food products closely integrated into the social, cultural, economic, and religious aspects of life. However, yams do not store well due to their perishable nature, which causes them to lose freshness and enter a dormant state rapidly. This study aims to use a single-cyclone flash dryer to produce high-quality instant pounded yam flour. As drying is a crucial method for maintaining food/agricultural produce to prevent post-harvest losses, selecting a suitable dryer is also key to producing quality flour. This study utilized a flash dryer due to its high efficiency and low energy consumption including high operating temperature (up to 200°C). The study uses white yam variety (Dioscorea rotundata) in two states: stored yams and fresh-harvested yams, with moisture contents of 59% and 72%, respectively. Findings from this study indicates that stored yam samples yield 29.12% more flour than fresh yam samples, indicating higher yields for food processors if stored yam is considered for IPYF production. Also, this study found that the moisture content of the samples significantly influences the flour's nutritional composition, as stored samples require lower drying temperatures than fresh yam samples. In addition, larger particle-size samples (4.5 μm) have lower moisture content post-grating, which affects the drying temperature and duration. This indicates that stored yam tubers are preferred due to their high quality and profitability. This study found that, despite the high drying temperature, the drying time is very short, helping preserve the nutritional and other essential properties of IPYF.
Article Details
Copyright (c) 2026 Rukayat Omobolanle Bello, Abdulganiy Olayinka Raji, Bolanle Asiru, Suraju Adeyemi Adegbite, Abdulrasheed Opeyemi Alade, Abimbola Olokoshe (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Rukayat Omobolanle Bello, Yaba College of Technology, Lagos, Nigeria
I hold the rank of Lecturer 1 and teach post-harvest engineering-related courses in the agricultural and bio-environmental engineering department at Yaba College of Technology, Epe campus, Lagos, Nigeria.
Abulude, F. O., Elemide, A. O., Oladipupo, O. K., & Ale, T. A. (2018). Sensory analysis test of pounded yam made from a pounding machine designed and fabricated in Nigeria. DOI: 10.20944/preprints201810.0195.v1. DOI: https://doi.org/10.20944/preprints201810.0195.v1
Acosta-Piantini, E., Villarán, M. C., Martínez, Á., & Lombraña, J. I. (2024). Examining the Effect of Freezing Temperatures on the Survival Rate of Micro-Encapsulated Probiotic Lactobacillus acidophilus LA5 Using the Flash Freeze-Drying (FFD) Strategy. Microorganisms, 12(3), 506. DOI: https://doi.org/10.3390/microorganisms12030506
Addae, A. K. (2013). The effect of some storage methods on the quality and shelf-life of some cultivars of white yam (Dioscorea rotundata) variety.
Adegbite, S. A., Asiru, W. B., Sartas, M., Tran, T., Taborda, A. L., Chapuis, A., ... & Abass, A. (2023). Development of a pilot scale energy efficient flash dryer for cassava flour. Resources, Environment and Sustainability, 13, 100117. DOI: https://doi.org/10.1016/j.resenv.2023.100117
Amaefula, A. (2021). Yam production and its determinants in Nigeria. Nigeria Agricultural Journal, 52(3), 116-124.
AOAC (2023). Official Methods of Analysis, 22nd Edition. Association of official Analytical Chemists, Washington D.C.
Aprianita, A., Vasiljevic, T., Bannikova, A., & Kasapis, S. (2014). Physicochemical properties of flours and starches derived from traditional Indonesian tubers and roots. Journal of food science and technology, 51, 3669-3679. DOI: https://doi.org/10.1007/s13197-012-0915-5
Arise, A. K., Esan, O. T., & Famakinde, T. R. (2023). Amino acid, pasting and sensory properties of “Poundo” yam enriched with fermented Bambara groundnut flour. Ceylon Journal of Science, 52(1), 83-89. DOI: https://doi.org/10.4038/cjs.v52i1.8107
Baeyens, J., Van Gauwbergen, D., & Vinckier, I. (1995). Pneumatic drying: the use of large-scale experimental data in a design procedure. Powder technology, 83(2), 139-148. DOI: https://doi.org/10.1016/0032-5910(94)02945-K
Batey, I. L., & Curtin, B. M. (2000). Effects on pasting viscosity of starch and flour from different operating conditions for the Rapid Visco Analyser. Cereal Chemistry, 77(6), 754-760. DOI: https://doi.org/10.1094/CCHEM.2000.77.6.754
Bello R.O., Raji A.O and Asiru W.B. Investigation of energy efficiency of Single Cyclone Flash Dryer. iSteam Conference 2020.
Dapaah, P. K. (2014). Assessment of postharvest losses of yam production in the Krachi-East District of the Volta Region of Ghana (Doctoral dissertation).
Frost, J. (2021). Standard Deviation: Interpretations and Calculations. Statistics By Jim. https://statisticsbyjim.com/basics/standard-deviation/
Grace, N. C., & Jeyakumar Henry, C. (2020). The physicochemical characterization of unconventional starches and flours used in Asia. Foods, 9(2), 182. DOI: https://doi.org/10.3390/foods9020182
Huang, P. H., Chiu, C. S., Chiang, Y. C., Lu, W. C., Ke, S. Y., Wang, C. C. R., & Li, P. H. (2024). Electrostatic effect on freshness preservation and quality evaluation of yam (Dioscorea alata) tuber during cold storage. Journal of Agriculture and Food Research, 17, 101222. DOI: https://doi.org/10.1016/j.jafr.2024.101222
Jimoh, K.A., Hashim, N., Shamsudin, R. (2023) Recent Advances in the Drying Process of Grains. Food Eng Rev 15, 548–576. https://doi.org/10.1007/s12393-023-09333-7. DOI: https://doi.org/10.1007/s12393-023-09333-7
Jokiniemi T., Kautto K., Kokin K. and Ahokas J. 2011. Energy efficiency measurements in Grain Drying. Assessed at researchgate.net/scientific on 25 November 2020.
Kuye, A., Ayo, D. B., Sanni, L. O., Raji, A. O., Kwaya, E. I., Otuu, O. O. & Okechukwu, R. (2011). Design and fabrication of a flash dryer for the production of high-quality cassava flour.
Lebot, V., Lawac, F., & Legendre, L. (2023). The greater yam (Dioscorea alata L.): A review of its phytochemical content and potential for processed products and biofortification. Journal of Food Composition and Analysis, 115, 104987. DOI: https://doi.org/10.1016/j.jfca.2022.104987
Li, L., Zhang, M., & Bhandari, B. (2019). Influence of drying methods on some physicochemical, functional and pasting properties of Chinese yam flour. Lwt, 111, 182-189. DOI: https://doi.org/10.1016/j.lwt.2019.05.034
Mgbechidinma, C. L., Zheng, G., Baguya, E. B., Zhou, H., Okon, S. U., & Zhang, C. (2023). Fatty acid composition and nutritional analysis of waste crude fish oil obtained by optimized milder extraction methods. Environmental Engineering Research, 28(2). DOI: https://doi.org/10.4491/eer.2022.034
Nadia, L., Wirakartakusumah, M. A., Andarwulan, N., Purnomo, E. H., Koaze, H., & Noda, T. (2014). Characterization of physicochemical and functional properties of starch from five yam (Dioscorea alata) cultivars in Indonesia. International Journal of Chemical Engineering and Applications, 5(6), 489-496. DOI: https://doi.org/10.7763/IJCEA.2014.V5.434
Nanam, T. D., Sanni, L.O., Wahab, B.A., Owo, H.O., Adebowale, A.A., Sobukola, O.P., Obadina, O.A., Kajihausa, O.E.andAdegunwa, M.O. 2011. Gains from Losses of Roots and Tuber Crops.Seventh Framework Programme of deliverable Report: Gratitude, no 3.1.
Nanbol, K. K., & Namo, O. (2019). The contribution of root and tuber crops to food security: A review. J. Agric. Sci. Technol. B, 9(10.17265), 2161-6264. DOI: https://doi.org/10.17265/2161-6264/2019.04.001
Naskar, A., Chakraborty, I., Roy, S. R., & Bhattacharya, T. (2022). Edible film on food with smart incorporation of health‐friendly supplements. Nanotechnology in Intelligent Food Packaging, 361-382. DOI: https://doi.org/10.1002/9781119819011.ch15
Niba, L. L., Bokanga, M. M., Jackson, F. L., Schlimme, D. S., & Li, B. W. (2002). Physicochemical properties and starch granular characteristics of flour from various Manihot esculenta (cassava) genotypes. Journal of food science, 67(5), 1701-1705. DOI: https://doi.org/10.1111/j.1365-2621.2002.tb08709.x
Nwachukwu, I. D., & Aluko, R. E. (2021). Food Proteins and Peptides: Emerging Biofunctions, Food and Biomaterial Applications, ed. C. C. Udenigwe, The Royal Society of Chemistry, 2021, pp. 1-33 Doi: https://doi.org/10.1039/9781839163425-00001. DOI: https://doi.org/10.1039/9781839163425-00001
Nwakaudu, A. A., Nwakaudu, M. S., Owuamanam, C. I., Alagbaoso, S. O., Njoku, N. E., Agunwah, I. M., & Ofoegbu, J. O. (2017). Effect of carboxymethylcellulose incorporation on the functional, pasting and sensory properties of water yam (D. alata) flour. European Journal of Food Science and Technology, 5(1), 1-12.
Nwogha, J. S., Wosene, A. G., Raveendran, M., Oselebe, H. O., Obidiegwu, J. E., & Amirtham, D. (2022). Physiological and Molecular basis of dormancy in yam tuber: A way forward towards genetic manipulation of dormancy in yam tubers. Glob. J. Sci. Front. Res, 47-73.
Olaleye, S. A., Arisoyin, A. G., Omoniyi, O., Elemide, O. A., & Okunola, A. A. (2020). Development of indigenous yam pounding machine for home use. In IOP Conference Series: Earth and Environmental Science (Vol. 445, No. 1, p. 012010). IOP Publishing. DOI: https://doi.org/10.1088/1755-1315/445/1/012010
Olaoye, J. O., & Oyewole, S. N. (2012). Optimization of some “poundo” yam production parameters. Agricultural Engineering International: CIGR Journal, 14(2), 58-67.
Olumurewa, J. A. V., & Alejolowo, I. A. (2020). Evaluation of instant pounded yam flour produced from yellow yam Dioscorea cayenensis). Canadian Journal of Agriculture and Crops, 5(1), 7-24. DOI: https://doi.org/10.20448/803.5.1.7.24
Oluwamukomi, M. O., Adeyemi, A. O., & IB, O. (2015). Physicochemical, pasting, and sensory properties of poundoyam enriched with defatted soy flour. Applied Tropical Agriculture, 20(1), 89-95.
Otegbayo, B. O., Asiedu, R., & Bokanga, M. (2012). Effects of storage on the chemical composition and food quality of yam. Journal of Food Processing and Preservation, 36(5), 438-445. DOI: https://doi.org/10.1111/j.1745-4549.2011.00600.x
Pranoto, Y. (2022). Starch and its derivatives as potential source of prebiotics. Probiotics, prebiotics and synbiotics: technological advancements towards safety and industrial applications, 378-406. DOI: https://doi.org/10.1002/9781119702160.ch16
Ray, A. K. (2023). Drying. In Coulson and Richardson's Chemical Engineering (pp. 457-533). Butterworth Heinemann. DOI: https://doi.org/10.1016/B978-0-08-101097-6.00007-9
Taylor, M., Lebot, V., McGregor, A., & Redden, R. J. (2019). Sustainable production of roots and tuber crops for food security under climate change. Food security and climate change, 359-376. DOI: https://doi.org/10.1002/9781119180661.ch15
Tenadu, E. O. (2016). Assessing the post-harvest performance of two yam varieties (Dioscorea Species) UNDER two improved structures in the Ejura–Sekyedumase District of Ashanti Region (Doctoral dissertation).
Trakumas, S., Willeke, K., Reponen, T., Grinshpun, S. A., & Friedman, W. (2001). Comparison of filter bag, cyclonic, and wet dust collection methods in vacuum cleaners. AIHAJ-American Industrial Hygiene Association, 62(5), 573-583. DOI: https://doi.org/10.1080/15298660108984656
Tran, T., Abass, A., Andrade, L. A. T., Chapuis, A., Precoppe, M., Adinsi, L., & Dufour, D. (2022). Cost-effective cassava processing: Case study of small-scale flash-dryer reengineering. In Root, Tuber and Banana Food System Innovations: Value Creation for Inclusive Outcomes (pp. 105-143). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-030-92022-7_4. DOI: https://doi.org/10.1007/978-3-030-92022-7_4
Xu, F., Zhang, L., Liu, W., Liu, Q., Wang, F., Zhang, H., & Blecker, C. (2021). Physicochemical and structural characterization of potato starch with different degrees of gelatinization. Foods, 10(5), 1104. DOI: https://doi.org/10.3390/foods10051104
Zhang, X., Wu, H., Ma, S., Ma, L., Wang, K., Wang, H., ... & Chang, Y. (2024). Flash drying of slurry-liquid sewage sludge based on avoidance of latent heat of phase change: Laboratory to pilot-scale evolution. Chemical Engineering Journal, 480, 148371 DOI: https://doi.org/10.1016/j.cej.2023.148371
Article Sidebar
